Two schemes are suggested - either all mics together, then intruments together; or group by performer. In either case, it is recommended that the inputs are laid out to match the position of the performers on the stage Example setups, assuming 2 performers each playing 2 instruments
| Option | Connections | Notes |
|---|---|---|
| 1 | Input 1: Performer 1 Mic Input 2: Performer 2 Mic Input 3: Performer 1 Instrument 1 Input 4: Performer 1 Instrument 2 Input 5: Performer 2 Instrument 1 Input 6: Performer 2 Instrument 2 | |
| 2 | Input 1: Performer 1 Mic Input 2: Performer 1 Instrument 1 Input 3: Performer 1 Instrument 2 Input 4: Performer 2 Mic Input 5: Performer 2 Instrument 1 Input 6: Performer 2 Instrument 2 | Recommended approach |
It is recommended that the performers monitors are connected to Mix Bus 1 upwards, as below:
| Bus | Oupt |
|---|---|
| 1 | Monitor 1 |
| 2 | Monitor 2 |
| 3 | Monitor 3 |
etc…