Behringer X32 Manual

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Suggested Setup ======

===== Inputs =====


Two schemes are suggested - either all mics together, then intruments together; or group by performer.
In either case, it is recommended that the inputs are laid out to match the position of the performers on the stage
Example setups, assuming 2 performers each playing 2 instruments
^Option^Connections^Notes^
|1|Input 1: <color green>Performer 1 Mic</color> \\ Input 2: Performer 2 Mic \\ Input 3: <color green>Performer 1 Instrument 1</color> \\ Input 4: <color green>Performer 1 Instrument 2</color> \\ Input 5: Performer 2 Instrument 1 \\ Input 6: Performer 2 Instrument 2 | |
|2|Input 1: <color green>Performer 1 Mic</color> \\ Input 2: <color green>Performer 1 Instrument 1</color> \\ Input 3: <color green>Performer 1 Instrument 2</color> \\ Input 4: Performer 2 Mic \\  Input 5: Performer 2 Instrument 1 \\ Input 6: Performer 2 Instrument 2 |Recommended approach|


==== Outputs ====

It is recommended that the performers monitors are connected to Mix Bus 1 upwards, as below:

^Bus^Oupt^
|1|Monitor 1|
|2|Monitor 2|
|3|Monitor 3|
etc...