Differences

This shows you the differences between two versions of the page.

--- suggestedsetup [2025/02/06 23:27] – [Inputs] msebborn
+++ suggestedsetup [2025/03/23 14:08] (current) – msebborn
@@ Line 6: / Line 6: @@
 Two schemes are suggested - either all mics together, then intruments together; or group by performer.
 In either case, it is recommended that the inputs are laid out to match the position of the performers on the stage
-Example setups, assuming 2 performers playing 4 instruments (2 each)
+Example setups, assuming 2 performers each playing 2 instruments
+^Option^Connections^Notes^
+|1|Input 1: <color green>Performer 1 Mic</color> \\ Input 2: Performer 2 Mic \\ Input 3: <color green>Performer 1 Instrument 1</color> \\ Input 4: <color green>Performer 1 Instrument 2</color> \\ Input 5: Performer 2 Instrument 1 \\ Input 6: Performer 2 Instrument 2 | |
+|2|Input 1: <color green>Performer 1 Mic</color> \\ Input 2: <color green>Performer 1 Instrument 1</color> \\ Input 3: <color green>Performer 1 Instrument 2</color> \\ Input 4: Performer 2 Mic \\  Input 5: Performer 2 Instrument 1 \\ Input 6: Performer 2 Instrument 2 |Recommended approach|
-^Option^Connections^
-|1| |
-|2| |
+==== Outputs ====
-==== Option 1 ====
+It is recommended that the performers monitors are connected to Mix Bus 1 upwards, as below:
+^Bus^Oupt^
+|1|Monitor 1|
+|2|Monitor 2|
-==== Option 2 ====
+|3|Monitor 3|
+etc...