Differences

This shows you the differences between two versions of the page.

--- advanced [2025/03/23 19:04] – msebborn
+++ advanced [2026/04/24 14:42] (current) – msebborn
@@ Line 12: / Line 12: @@
 ===== Saving Scenes =====
-The desk has the ability to save a scene - this saves all of the desks paramters for later retrieval. So it could be used to save all the settings for each band on an open mic night, loading them as they setup for performance.
+The desk has the ability to save a scene - this saves all of the desk's parameters for later retrieval. So it could be used to save all the settings for each band on an open mic night, loading them as they setup for performance.
 Saving Procedure:
@@ Line 37: / Line 37: @@
 Note: Due to the FAT format of the stick, the file size will be limited to 2 GB, which is about 3 hours of stereo recording. Please test the recording capability of your USB device before you do the “real stuff” as some sticks may not be supported or be too slow. We also recommend you defragment your USB device prior to recording. The recording will be done as 16-bit WAV file with the selected sample frequency of the console
+===== Copying settings =====
+If you have set up the levels, EQ etc for one channel, you can copy it to another channel:
+  * Press the SELECT button for a channel whose settings you wish to copy.
+  * Press the HOME button, then the UTILITY button.
+  * Press the 5th encoder to copy all settings of the selected channel into the copy buffer.
+  * Press the SELECT button for a channel who you wish to paste the settings into.
+  * Adjust the first encoder to select which aspects of the channel you wish to copy from the source channel (i.e. the one in the paste buffer).
+  * Press the 6th encoder to “paste” the copied settings into the currently selected channel.