Differences

This shows you the differences between two versions of the page.

--- advanced [2025/03/23 18:59] – [Saving Scenes] msebborn
+++ advanced [2025/03/23 19:04] (current) – msebborn
@@ Line 26: / Line 26: @@
   * When the desired scene is highlighted in the scenes list on the Main Display, press the red “GO” button and the console will switch to the highlighted scene. All console parameters will switch to the state they were in when saved to the scene that was just recalled.
+===== Recording a performance =====
+The X32 offers the possibility to record a 2-track of your mix (or any other selection of signals) directly onto a USB-stick/external USB hard disk:
+  * Plug a FAT-formatted (FAT12, FAT16, FAT32) USB stick into the USB port next to the main display.
+  * Press the VIEW button next to the USB port and the home screen of the recorder will show up with a nice emulation of an old tape deck.
+  * On the config tab you can select the source for the recording, default is main L and R.
+  * Press RECORD (encoder #5) to record your mix.
+  * To adjust the volume during playback, press the AUX IN / USB FX RETURN button next to the fader section and adjust the volume with the AUX 7/8 faders.
+Note: Due to the FAT format of the stick, the file size will be limited to 2 GB, which is about 3 hours of stereo recording. Please test the recording capability of your USB device before you do the “real stuff” as some sticks may not be supported or be too slow. We also recommend you defragment your USB device prior to recording. The recording will be done as 16-bit WAV file with the selected sample frequency of the console